Factory and Office Department Vastu
A factory follows the same Vastu ideas as a home, only on a bigger scale. The heavy parts go to the South and West, fire and power go to the South-East, things that must move out fast go to the North-West, and the North-East stays open and clean. This page gives a simple layout for a factory plot and a guide for placing departments inside an office. Use it with your engineer, because safety laws and work flow always come first.
- Main gate
- East, North or North-East
- Raw material store
- South-West
- Finished goods
- North-West
- Boiler and electric panel
- South-East
- Owner's seat
- Facing East or North, solid wall behind
- Centre of the building
- Kept open
- Worker quarters
- North-West, lower than the main building
Gate and guard room
The main gate is best in the East, the North or the North-East of the plot, in the middle stretch of the wall rather than the exact corner. The guard room is placed right next to the gate. Keep the gate wide enough for trucks to turn easily. The guard room can also sit in the South-East or the North-West near the gate. Leave a gap of about 3 feet between the guard room and the walls of the main building, so the two do not touch.
Stores and goods
Raw material is heavy and stays for a while, so it is kept in the South-West. Finished goods should leave the factory quickly, so they are kept in the North-West, the corner of movement. Many owners feel this helps goods move out fast.
- Raw material store: South-West
- Finished goods store: North-West
- Scrap and waste: South or West, cleared often
- Loading bay: North-West or East
- Dispatch of finished goods: out through a North or East gate
Machines, boiler and power
Heavy machines are placed in the South and West parts of the shed. The boiler, furnace, oven, electric panel and transformer go to the South-East, the fire corner. Keep the North-East part of the shed light, with fewer machines. A boiler may also go in the South; if neither is possible, the West or the East will do, but never the North-East, the North-West or the North.
- Heavy machines: South or West, in a row from the South-West along the West wall
- Light and hand-run machines: North, East or South-East
- Machine operators: facing North or East while they work
- Furnace: South-East
- Boiler: South-East or South
Shed roof and worker quarters
A shed roof that slopes to both sides is fine. A roof that slopes to one side only should drop towards the North or the East. A roof sloping only to the West is traditionally the weaker choice, so plan the next shed or extension with a two-sided roof or a North or East slope; an existing roof does not need to be rebuilt. Quarters for workers or staff go in the North-West. Keep them a little away from the North and East boundary walls, not touching them, and build them lower than the main factory building.
- Two-sided shed roof: fine
- One-sided shed roof: slopes to the North or the East
- Worker quarters: North-West, lower than the main building
- Worker quarters: not touching the North or East boundary wall
Admin block, parking and open space
The admin block or office is placed in the North or East part of the plot. Parking for staff and visitors is in the North-West. Leave the North-East as open space, a lawn or a garden. An underground water tank or bore is in the North-East, and the overhead tank goes in the South-West.
- Admin block: North or East
- Parking: North-West
- Open space: North-East
- Underground water: North-East
- Overhead tank: South-West
- Toilets: West or North-West
The owner's seat
The owner or director sits facing East or North with a solid wall behind, not a window or a door. The cabin is best in the South-West of the building. The cash safe is kept in the South-West or the North of the cabin, opening towards the North.
Office departments
Inside an office, each team can be placed by direction. This is a guide only; work flow comes first.
- Managers and directors: South, West or South-West
- Accounts team: South-East
- Reception: North-East, near the entry
- Marketing and sales: North-West
- General staff: seated facing North or East
- Centre of the floor: left open as a walkway
Safety and law first
A factory has fire, power, chemicals and heavy loads. Fire exits, fire fighting gear, safe wiring, pollution rules and labour laws are always followed first. A Vastu change is made only when it fits within these rules.
These are traditional Vastu pointers, not a promise. Most homes have one or two small faults, and simple fixes are enough. For safety and strength, always follow a qualified engineer and the building rules of your city.
Questions people ask
Can the factory gate be in the South?
East, North or North-East is preferred. A South gate in its favoured middle part is allowed if the road demands it.
Where should the boiler go?
In the South-East or the South of the shed, with proper safety clearances. Never in the North-East, the North-West or the North.
Why are finished goods kept in the North-West?
The North-West is linked with movement, so goods placed there are expected to move out quickly.
Will this layout increase my profit?
No layout can promise profit. Good products, prices and planning matter most. Vastu is a traditional guide for a calm workplace.
Where do staff toilets go?
In the West or the North-West. Never in the North-East.
Which way should a shed roof slope?
A two-sided roof is fine. A one-sided roof should drop towards the North or the East. This matters for a new shed; an old roof need not be rebuilt.
Through which gate should goods leave?
Finished goods are best sent out through a North or an East gate.
More Vastu tools and guides
Vastu ColoursPictures and MirrorsElectronicsCompound and GateLife Problems